Best Bitcoin Mining Hardware You Can Buy Online

Here I’m going to tell you what bitcoin mining hardware requirements you need to start for crypto mining.

But first, you should be clear about which mining types you are going. 

There are 2 types of bitcoin mining hardware which has their advantages and disadvantages.

I will discuss here in detail to have a clear vision of which mining types will suit you.

Also, according to your budget, choose Bitcoin Mining Hardware.

All the hardware-related equipment you can get online, so no need to worry about finding this hardware.

Two types of Bitcoin Mining Hardware

– GPU Mining

If you are a small investor, then you can go with GPU mining. 

The GPU is a processing unit that is used to process games and high-end graphics. 

So with this graphic process, you can use it for bitcoin mining.

This was some essential thing you should know before starting bitcoin mining.

Hardware Requirement for GPU Mining

The hardware requirement for GPU mining is not very expensive compared to ASIC mining.

Below is the list of hardware you are going to need for mining:

• Motherboard, 
• Graphic Card (6GB/8GB)
• SMPS of 750Watt + (Power Supply)
• Monitor, Key
• Ram
• Storage
• Processor
• PCI-e risers
• SSD
• Ethernet Cable
• Wi-Fi Adapter
• Mining rig frame
• USB Flash Drive
• PCI-e Y-Splitter

If you want to build a mining rig, you have to increase the number of graphic cards and power supply.

Image	Description	Link
	Motherboard: ASUS Prime Z590-A	View On Amazon
	Processor: Intel CPU Core i3	View On Amazon
	Ram: Corsair Vengeance LPX 4GB	View On Amazon
	Power Supply: EVGA SuperNOVA 1600	View On Amazon
	Riser: PCI-E GPU Riser Express Cable (6 Pin)	View On Amazon
	Internet: Ethernet Cable (25 Feet)	View On Amazon
	WiFi Adapter: TP-Link USB	View On Amazon
	SSD: SAMSUNG 870 QVO	View On Amazon
	Mining Rig: 8 GPU Stackable Frame	View On Amazon
	PC case: NZXT H510 (If you want to build with 2-3 GPU)	View On Amazon

There are several GPUs in the market, some are expensive and some are at a decent price.

If you have a low budget then go with 10 series.

Below is the list of products you can choose one and build a mining rig.

Image	Description	Link
	GPU 1: EVGA GeForce GTX 1070 Ti	View On Amazon
	GPU 2: Gigabyte GeForce GTX 1080	View On Amazon
	GPU 3: ASUS ROG STRIX GeForce GTX 1080	View On Amazon
	GPU 4: MSI Gaming GeForce GTX 1070 Ti 8GB	View On Amazon

How Setup GPU Mining

Here are a few setups you have to follow which may require time, so choose a day when you are free for the whole day.

I will recommend you to have all the parts. Any missing parts will affect your mining rig build.

1. First, assemble the mining rig.

You can create your mining rig, or you can get it online for a few bucks.

The build quality of a mining rig should be good, and edges should not be sharp. 

Check here: Best GPU Mining Case

If you are taking a mining rig online, then assembling the rig is very simple to do. You need a screwdriver and a manual. 

If you want to build your mining rig case, check this article: Making a mining rig case frame.

After completing this, now unbox the processor.

2. Attach processor

Now the first thing you have to do is take out your motherboard and attach a processor.

Installing a processor is very straightforward. You have to pull the lever next to the CPU socket.

Take the processor and see to it that you align the tiny dot on a motherboard. This process is the same with any processor like intel or a Ryzen.

Now put the lever back on. The processor should get fixed on the socket without any pressure. If it takes any pressure, then don’t force it. You might wrongly align it.

Now add a CPU fan on top of a processor. For the CPU fan, plug the socket in the correct port.

You can see the 4 pins, and it will be written on a motherboard CPU fan, now plug the socket.

Now the CPU fan is all done. 

Let’s move into an installment of RAM.

3. RAM to the motherboard.

Now see on the motherboard how many slots you have for ram.

If you have 4 slots, then add ram on the 2nd and 4th slots first.

If you have 2 slots, then add ram on the 1st slot.

source: https://images-eu.ssl-images-amazon.com/images/I/D1dgK4TKE9S.pdf

Installing ram on the motherboard is simple. 

Unlock the latch and slide the ram into the slots and add some pressure. You will hear a little clip sound, and the latch will be automatically clipped into it.

Now your motherboard is all ready to attach.

4. Attach the motherboard on a mining rig.

Now you have to place the motherboard onto your mining rig frame. 

Now screw all sides of the motherboard to the rig.

Also, attach the SSD to the rig frame. 

You should have a SATA cable so you could connect your SSD with the motherboard. There will be multiple plugs for your SATA cable. You can put it into any cable on the motherboard. 

And another cable is a power cable that connects to the power supply.

Now add the power button to the motherboard. 

Note: to plug this power button, and there is a bottom right to the motherboard; there are many pins. The third and fourth pin from the top left is usually a power switch pin. Refer to the motherboard manual, and it might differ to different motherboards.

5. Attach Power Supply.

First, attach the power supply to your mining rig case.

Now connect the 24 pins to the motherboard.

Note: Try to avoid loose connections because that can cause some damage later on. 

After connecting the 24 pins, plug the CPU cable in the top left of the motherboard.

Now enter the SATA power cable to SSD.

Now the last step is to attach the GPU.

6. Attach USB riser

Now this work is a little bit tedious. The PCI-e x1 needs to be connected to the motherboard and make use of your x16 USB riser that has assembled with PCI-e x1. 

When it comes to PCI-e slots, you should rank them with the primary slots. The primary slots are larger, so you can plug in the GPU whichever x16 slot you use first.

You will need to first plug into large slots, as I already mentioned. The largest slots are the first, then the next. You will then have a smaller slot, which will vary depending on the motherboard.

MAKE SURE YOU REFER TO YOUR MOTHERBOARD MANUALS.

Now to give a power connection to the riser, you will need a six-pin connector, a SATA cable, or a Molex connector to connect it. 

Connect all power cables to the USB risers. For each PSU cable, you can use up to 2 Molex connectors or SATA connectors. It is dangerous to connect more than 4 power connectors with 3 or 4 risers.

7. Attach GPU

After all, the riser is properly connected to your motherboard and now attaches the GPU, which is very easy.

8. Installing fans

You almost reach to appoint where you are done with your mining rig. 

If you are planning on inserting some fans, you can feel free to do some fans if your mining rig case supports fans. It helps with the temperature, so having some fans will be very helpful.

9. Cable management

Now the most agonizing step of the process is cable management, so you want to go ahead and try to clean up the cable as much as possible. 

10. Final steps

After organizing your cable now, you are with the GPU mining rig.

Check all the connections which should connect adequately.

Once all the steps are completed, you need mining software.

Check here: Best Bitcoin Mining Software

– ASIC Mining

ASIC mining is hardware that is made particularly for mining hardware.

ASIC stands for “Application Specific Integrated Circuit.” Miner is designed to solve problems using the SHA256 hashing algorithm.

ASIC mining is costly, and it is tough to get hardware because of demand.

I will give you a tip on how you can make ROI great, so follow these things, which is given below:

Image	Description	Link
	ASIC Miner 1: Whatsminer M32-70	Buy The Miner Here
	ASIC Miner 2: Antminer S9	Buy The Miner Here
	ASIC Miner 3: AvalonMiner 1246	Buy The Miner Here
	ASIC Miner 4: AvalonMiner A1166	Buy The Miner Here

Tips: When the bull market over the ASIC and GPU gets flooded by second-hand hardware, that’s the time you buy the hardware. The prices of the hardware also drop drastically.

Hardware Requirement for ASIC Mining

Below is the list of hardware you are going to need for ASIC mining:

• Lan cable
• Wifi router
• Any ASIC devices
• Two 16 ampere socket

How Setup ASIC Mining

The setup of ASIC miner is straightforward can be done in few steps. But you should have a wifi router and an ether cable. 

1. Attach socket

Connect your ASIC with the 16-ampere socket.

2. Connect Lan cable to wifi router

Connect one end of your LAN cable to the ASIC miner and another end to the wifi router.

3. Turn on ASIC

Turn on your wifi and ASIC miner so that you can find out the IP address of your ASIC miner.

4. Discover the IP address

First, you have to download an IP address scanner. You can download this software on this website click here to download it. 

Install the software and click on scan to scan all the IP addresses connected to the wifi router.

5. Configuration

After getting the IP address, copy and paste the address into a browser URL.

Now a popup will come, which is going to ask User’s name and password.

Login with username and password.

After login, it will show hash rates of your hardware, and now you have to connect with a mining pool.

So to do that, choose a mining pool, and they will provide you with a URL.

You have to enter that URL.

After this, your miner will reboot, and it will take 5 to 10 sec.

Now your miner has started.

FAQ