Disclaimer: This site contains affiliate links to products. We may receive a commission for purchases made through these links.
Here are some best GPU Mining Rig Frame You can use for your bitcoin, Ethereum, or cryptocurrency mining.
Best Mining Frames you can purchase online for your cryptocurrency mining.
If you should have a toolbox and screw these things, you will need them before building the mining rig.
Here I’m going to tell you which one is the best mining case per your mining rig.
All the mining rigs are available online to buy.
Table of Contents
Best Mining Frames For 4 GPU
– Sinobright Mining Rig Frames
Product Description:
- Type: Open Air
- Max. Supported GPUs: 4
- Material: Aluminum
- Fan: Included
Sinobright mining rig frame is one of the best 4 GPU rigs. It is made up of high-quality aluminum alloy material. It fully protects the GPU.
Sinobright rig frame is solid and durable.
The best part of this mining frame is it supports ATX and MATX. Also, the spaces between each GPU are suitable, which makes them Cool and Quiet.
It has a Mining Rig Frame 6 GPU with 5 Fans and 6 Adapters.
Features:
- Dual PSU Mounting.
- Supports upto 32CM GPU.
- Provides Stacking
- Open air mining
- Solid and elegant construction.
- High-quality materials.
- Fast Shipping.
- It’s a very attractive rack.
- It is very strong
- It is very lightweight, considering its strength.
- The integrated power switch makes it a great addition.
- The instructions were difficult to follow (the pictures and text were too small).
- I would have preferred to see more compatibility for the motherboard standoff mounting holes.
- The frame is a complicated assembly.
– Koyzsen Mining Frame
Product Description:
- Type: Open Air
- Max. Supported GPUs: 4/6
- Material: Aluminum
- Fan: Not Included
The Koyzsen V3C is undoubtedly one of the best pre-assembled cryptocurrency mining machines for 4 GPU mining rigs.
This mining frame measures 570 x 370 x 360 mm and is entirely made of aluminum. The frame size is almost 7.71618 lbs.
The mining frame contains four fans which are good to make graphic cards cool. It supports six GPUs, but I suggest you use 4 GPUs only so that GPU doesn’t get hot often.
In terms of airflow, it is best in class, with four fans supported in the front to make the GPU cool.
Features:
- Switch Button Equipped with 1 Piece Single Wire
- Dual PSU
- Supports ATX/MATX/ITX Motherboard.
- Prior to delivery, the product arrived quickly in the international country.
- Hardware includes various fasteners that are used to attach frames and attach motherboards, DDH, or other components.
- To set up took way too long.
- It is minimal for a 6 GPU rig.
- Poor airflow.
Best Mining Frames For 6 GPU
– MLLIQUEA Mining Rig Frame
Product Description:
- Type: Open Air
- Max. Supported GPUs: 6
- Material: Alloy Steel
- Fan: Not Included
The MLLIQUEA is the best budget mining rig for 6 GPU. The build quality of the mining frame is excellent, made up of the highest quality iron material.
It’s super easy to install the frame in significantly less time. The guide for the installment process is straightforward to understand.
What I like most about this product because it supports all the AXT motherboards, graphics cards, hard drives, and power supplies. The MLLIQUEA is designed for the mining frame according to the standard holes.
Features:
- Supports up to 5 fan
- Comes with all the screws
- Supports all the ATX motherboards.
- It was the cheapest mining frame I found.
- Fully functional for a 6-8 GPU rig.
- It was easy to put together. The entire process took less than 30 minutes.
- The standoff screws that secure the CPU board seem to be easy to put in.
- The build quality was good.
- It had awful packaging. Everything is kept together in one box.
- The frame’s bottom is too narrow to accommodate an additional ATX PSU
- Numerous fan mount holes were marked but not drilled (It happened only on my product).
– Veddha V3C
Product Description:
- Type: Open Air
- Max. Supported GPUs: 6
- Material: Aluminum Alloy
- Fan: Not Included
Veddha V3C is built with Aluminum Alloy, which is of high quality. There is no doubt it is a solid frame. If you want to build a big mining rig, you can choose this frame because It allows five-layer stacking. The dimension of the mining frame is about:365 mm x 640mm x 380mm, and the frame weight is almost ‎8.14 lbs.
The Veddha V3C also allows you to install up to seven 120 mm computer fans on its mounting positions in order to improve cooling and overall airflow.
Features:
- Dual PSU and hard drive.
- Support ATX/MATX Motherboard
- Supports PSU mounting Kit
- Built quality is excellent. Excellent quality and long-lasting.
- It is lightweight once it has been assembled.
- Open Air Frame
- These instructions were TINY!
- They should likely place several holes at different locations to support the GPU.
- EATX motherboards will not fit.
- Numerous screws are not labelled.
Best Mining Frames For 8 GPU
– Veddha V3C Aluminum Stackable Mining Rig Frame
Product Description:
- Type: Open Air Mining
- Max. Supported GPUs: 8
- Material: Aluminum
- Fan: Included
Veddha V3C is one of the best stackable mining frames out there. The combination of black and green look outstanding. It is made of high-quality materials and features a beautiful layout. Quality screws are never removed, and rail bars are strong.
The dimension of the mining frame is about: 880 mm x 360mm x 380mm, and the frame weight is almost ‎9 lbs.
Vedha V3C has a fan that is about 120 mm. It is designed to enhance the cooling of the GPU by putting an adequate amount of space in between.
Features:
- Dual PSU Hosting.
- Support ATX/MATX Motherboard.
- Can mount up to 32cm GPU.
- Allows 5-layer stacking.
- Arrived super fast
- Sturdy Construction
- Open Frame
- The metal is strong. The frame pieces are in paper sleeves.
- Allen Wrenches are included to fit the fasteners well. One with a wobble finish.
- All fasteners required are included.
- Once it is assembled, it feels fairly solid.
- There are not enough mounting holes, as shown in the image.
- Some of my screws wouldn’t fit into the mounts, so I have to buy some screws.
- Poor instructions were extremely unclear.
- It takes a lot of time to assemble.
- Fans are not included.
– CFYUSEU Mining Rig Case
Product Description:
- Type: Enclosed Mining Case
- Max. Supported GPUs: 8
- Material: Aluminum
- Fan: Included
CFYUSEU mining rig comes with the motherboard, CPU, power cord, 128GB SSD, 4G RAM, 3000 rpm cooling fan * 8, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. It’s the best cryptocurrency mining rig case for 8 GPU Slots.
All the parts are inbuilt, and the only thing is that there is a graphic card.
The air cooling method in this frame is so good that it maintains the temperature of the GPU and CPU. It has two fans in which one is used for air to go inside and another end to let air outside.
Features:
- In-built hardware.
- Low Noise.
- 8 GPU Support.
- Fans on both sides.
- No need to buy any products other than graphics cards.
- The mining rig is not very loud.
- Very easy to install.
- If you want to build a custom rig then it’s not for you.
– Kingwin Bitcoin Mining Rig Case
Product Description:
- Type: Open Air
- Max. Supported GPUs: 8
- Material: Aluminum
- Fan: Not Included
Kingwin is one of the budget mining rig frames in the market for 8 GPU rigs. It is comprehensive, making this mining rig’s temperature low—installation with sufficient space between GPUs for adequate airflow.
Kingwin is a very cheap mining rig case, but the construction and build quality are so good. The installation is straightforward. Even a beginner can assemble it.
It supports stackable mining rigs. It allows you to mount seven fans of 120 mm (the fan are not included with the product)
The look of the mining rig looks so awesome, which has a blue and black colour combination.
Features:
- Support SSD & HDD installation
- Enough space between GPUs.
- 7 fan slots for cooling.
- Good instruction. Pay attention to the orientations of the holes.
- Each bar is bagged individually and marked to match the instructions.
- All tools are included
- Screws are high quality.
- Protectors and fan brackets are great features.
- Space for 2PSUs, and good ventilation between GPUs.
- Instruction is mainly pictured.
- It’s a little rough around the edges.
- You will need to prepare your fans first in order to increase the screw holes.
Best Mining Frames For 12 GPU
– WarmLi
Product Description:
- Type: Open Air
- Max. Supported GPUs: 12
- Material: Metal
- Fan: Not Included
WarmLi is a budget mining rig frame. The frame is well designed with metal material which looks incredible.
The dimension of the mining frame is about: 723 mm x 266 mm x 241 mm, and the frame weight is almost 6.17294 pounds.
Warmli supports ATX motherboards with 12 GPUs. The cable management of the mining frame is good, which makes the rig very clean. The most important part is it is compatible with all the graphic cards. The design of the warmli structure is well designed, and the airflow is so good which Enhance Cooling and Extends the Service Life of Graphics Cards.
Features:
- 12x GPU slots
- Support Dual PSU
- Support ATX/MATX Motherboard
- The frame is sturdy and strong.
- Multiple GPUs can be held.
- Comes with a lot of screws and MB mountings.
- Installation is simple.
- Fits nice and is compact.
- The space between GPUs would be a little bit more.
- No instruction.
- No holes on the frame for the risers.
– Bomeiqee Mining Rig Frame
Product Description:
- Type: Open Air
- Max. Supported GPUs: 12
- Material: Stainless Steel
- Fan: Not Included
If you have many graphic cards, then you can go with the Bomeiqee mining frame. The design of the frame is astounding. It has two compartments for graphic cards. The two compartments make graphic cards cool because there is more space in between the mining rig. Because of the two compartments, it can fit anywhere.
The main thing I like about this mining frame is that it supports a dual power supply that can easily mount on the mining frame.
Every compartment has four fans which are 120mm (Fan is omitted).
The frame is made up of a Stainless Steel layout designed to increase airflow and GPU cooling. The frame can be easily stored in a basement if you are a small miner and can be kept in a warehouse or large area with good air conditioning.
Features:
- Dual PSU Mounting.
- support 2 ATX power supplies.
- No sharp edges.
- Holes at the right places.
- Includes all the hardware and instructions.
- The frame’s paint was poor.
- Took a long time to arrive.
– Koyzsen Aluminum Stackable
Product Description:
- Type: Open Air
- Max. Supported GPUs: 8/12/14/19
- Material: Aluminum
- Fan: Not Included
Koyzsen has multiple frames as per your graphic card requirement. It has a frame of 8 GPU, 12 GPU, 14 GPU, and 19 GPU. If you are trying to build a large mining rig, go for these Koyzsen frames, or else there are many budget frames shown above.
The mining rig frame comprises high-Quality Aluminum Alloy Material, which can be very strong and durable.
The dimension of the mining frame is about 280 mm x 157 mm x 3.1 mm, and the frame weight is almost 16.5 lbs.
So what I liked about this frame is there is so much space between each graphic card which makes airflow top class in these mining frames.
Features:
- Hold 12 GPU
- support 120mm fans
- Supports ATX/MATX Motherboard, Dual PSU.
- Supports PSU mounting Kit.
- The installation was extremely simple using just a few screws.
- Specific placement of holes makes it easier to install.
- The mining case is a little bit expensive.
Conclusion
You can build your mining rig frame, which will be less costly than pre-building rig frames. But it required time, energy, and knowledge to build. So if you don’t want any of this tedious work, go for an already made mining frame. Almost all the mining frames are easy to assemble.
So if you are confused about choosing any mining rig frame, I suggest you go with these brands: Bomeiqee, Veddha, Warmli, Koyzse, Sinobright, Cfyuseu, Knigwin, Mlliquea.
I hope this guide is helpful for you to choose the best cryptocurrency mining frame. Need advice on buying? Leave a comment below. We will do our best to assist you.
